Fabrication Workshop

Fabrication Workshop

The workshops are equipped to manufacture customized equipment and tools according to your specifications. Our engineering department can assist you to design any equipment before fabrication.

Products Covered Under Fabrication Workshop

Gate Valves

Gate valves are of generally two types- Rising stem and non rising stem gate valve. Rising stem gate valves have the threads external to the valve body. You can see the valve stem is moving up when the valve is opening.

Choke Manifold

The Choke Manifold is the primary well pressure and flow control package used during both offshore and onshore well testing, frac flow-back, well clean-up and early production operations.


Surface safety valve (SSV) is a hydraulically actuated fail-safe gate valve for producing or testing oil and gas wells with high flow rates, high pressures, or the presence of H2S.

Sand Filter (Dual/Single POT)

Dual-pot sand filter with sand jetting system (wellhead sand separator) is used to remove sand and other solid particles from oil and gas well effluent to prevent erosion of downstream equipment.

Trash Catcher

The Trash catcher is designed to recover large solid pieces. Debris/Trash catchers are normally positioned upstream of the choke manifold to prevent erosion damage to downstream equipment.

Sacrificial Choke Manifold / Flowback Manifold

Flowback Manifold allows for maintenance and repairs on the chokes throughout an operation with no interruption of the flow rate. Operator can remotely control well flow from a safe distance

Piping's/Cross overs

Crossover piping bellows are another example of the specialised steam pipe expansion joints. These are installed at steam turbines where high-pressure/ high- temperature steam is transferred to one or more low pressure turbines.

Our Values


Mutual Trust & Respect


Transparency & Openness

Our Components

Pup Joint
Gate Valves
Spacer Spool
Studded Block
Ring Gasket
Threaded Connector

Innovative and Cost-Effective Industrial Solutions!