Frac Equipments

Whether you are fracturing a vertical or horizontal well using plug & perf, NCS, ball drop or conventional methods, Aero’s frac heads can be assembled in any configuration to suit our your application. Aero is constantly monitoring the industry for new fracturing procedures, sizes, pressure ratings, and introducing new products to ensure we remain at the forefront of the industry in our ability to services our valued customers.

Aero’s experienced field technicians can help install, operate, grease and maintain frac equipment on your location 24 hours a day. Our field technicians have what it takes to get the job done quickly and safely to ensure your operation is running as seamlessly as it can.

Frac Stacks temporarily replace the Production Tree during high pressure pumping operations typically involving abrasive fluids (hydraulic fracture activities, etc.) to prevent damage to the Production Tree and costly repair or replacement.


  • 3-1/16″ bore valves for unobstructed profile (hydraulic & manual)
    2-3/8″, 2-7/8″, and 3-1/2″ tubings – all threads
  • 5-1/8″ 10K valves to 7-1/16″ 5K or 10K flange
  • 7-1/16″ and 4-1/16″ flanges with 10K and 15K WP ratings
  • Flow tee with 2 valves and choke
  • 10K and 15K psi WP rated equipment


  • 10K and 15K psi WP rating (hydraulic & manual)
  • All sizes, including 5-1/8″ and 7-1/16” full-bore opening

Key Specifications


Available in 5,000, 10,000 and 15,000 PSI pressure ratings

Bore Size

3 1/16” to 7 1/16″

Frac Return Separator

3 1/16”, 4 1/16” & 5 1/8” available with or without an isolation valve


  • Gate Valves – manual and hydraulic for 5K, 10K, 15K and 20K jobs
    • High-pressure manifolds
    • High-pressure frac ball catchers
    • High-pressure sand removal systems (sand knock-out units)
  • Blow-Out Preventers
  • Flanged Weco Unions
  • Assorted Flanges & Spools
  • Accumulators
  • Flow Crosses for Coil Tubing

Inventory of Buffalo Frac Heads

4 1/16″ 10,000# / 103.2 mm 70,000 kpa


4 1/16″ 15,000# 103.2 mm 104,000 kpa


5 1/8” 10,000# 130.0 mm 70,000 kpa


7 1/16″ 10,000# / 179.4 mm 70,000 kpa


7 1/16″ 15,000# / 179.4 mm 105,000 kpa


Frac Products

Gate Valves

Gate valves are of generally two types- Rising stem and non rising stem gate valve. Rising stem gate valves have the threads external to the valve body. You can see the valve stem is moving up when the valve is opening.

Choke Manifold

The Choke Manifold is the primary well pressure and flow control package used during both offshore and onshore well testing, frac flow-back, well clean-up and early production operations.


Surface safety valve (SSV) is a hydraulically actuated fail-safe gate valve for producing or testing oil and gas wells with high flow rates, high pressures, or the presence of H2S.

Sand Filter (Dual/Single POT)

Dual-pot sand filter with sand jetting system (wellhead sand separator) is used to remove sand and other solid particles from oil and gas well effluent to prevent erosion of downstream equipment.

Trash Catcher

The Trash catcher is designed to recover large solid pieces. Debris/Trash catchers are normally positioned upstream of the choke manifold to prevent erosion damage to downstream equipment.

Sacrificial Choke Manifold / Flowback Manifold

Flowback Manifold allows for maintenance and repairs on the chokes throughout an operation with no interruption of the flow rate. Operator can remotely control well flow from a safe distance

Piping's/Cross overs

Crossover piping bellows are another example of the specialised steam pipe expansion joints. These are installed at steam turbines where high-pressure/ high- temperature steam is transferred to one or more low pressure turbines.

Our Components

Pup Joint
Gate Valves
Spacer Spool
Studded Block
Ring Gasket
Threaded Connector

Innovative and Cost-Effective Industrial Solutions!